Makita Impact Driver 4-Mode BL 18V DTP141Z Skin Only

Features:

• Brushless DC motor
• 4 operation modes - impact driver, hammer drill, drill, screwdriver
• Mechanical 2 speed
• 3 stage power selection
• 9 stage clutch torque settings with Tek screw mode
• Battery fuel gauge
• Independent off switch for LED job light
• LED job light with pre and after glow function
• One touch bit installation
• Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
• Supplied with belt clip
• Tool only, battery and charger sold separately

Specifications:

• Battery Voltage: 18V
• Maximum Fastening Torque - Impact Driver: 150Nm
• Maximum Fastening Torque - Drill - Hard: 22Nm
• Maximum Fastening Torque - Drill - Soft: 13Nm
• No Load Speed - Impact Driver: 0-2700 RPM
• No Load Speed - Drill - High: 0-200 RPM
• No Load Speed - Drill - Low: 0-700 RPM
• No Load Speed - Screwdriver: 0-2300 RPM
• Impact Rate - Impact Driver: 0-3200 IPM
• Impact Rate - Hammer Drill: 0-32,400 IPM
• Drill Capacity In Steel: 10mm maximum, 6mm optimum
• Drill Capacity In Wood: 21mm maximum, 13mm optimum
• Hammer Drill Capacity In Masonry: 8mm maximum, 5mm optimum
• Fastening Capacity - Driver Drill: M4
• Fastening Capacity - Machine Screw - Impact Driver: M4-M8
• Fastening Capacity - Standard Bolt - Impact Driver: M5-M14
• Fastening Capacity - High Tensile Bolt - Impact Driver: M5-M12
• Fastening Capacity - Coarse Thread - Impact Driver: 22-125mm
• Drive Shank: 6.35mm(1/4" hex)
• Overall Length: 171mm
• Weight: 1.8kg